Z-GPRS3 is a Data-logger and RTU capable of meeting the increasing demands of Data Acquisition and Analysis
Capable of integrating with existing IT and Automation systems
Features GPRS modem, 4 integrated communication ports (1 Ethernet 10/100, 1 RS232/RS485, 1 RS485, 1 MicroUSB), 8 integrated I/O channels (4DI/meters/totalizers, 2AI, 2DO), voice alarms/audio controls with DTMF tones and the support of Ftp, Smtp, SMTP, HTTP rest, https, ModBUS RTU, ModBUS TCP-IP and SMS communication protocols
Easy programming thanks to a graphical user interface

Power Supply	11..40 Vdc, 19..28 Vac
Power Consumption	2 W (standby), 6,5 W (max)
Isolation	1500 V ac
Ingress Protection	IP20
Operating Temperature	-10..+50°C
Dimensions	35x100x112 mm
Digital Inputs	4 channels PNP, NPN (counters @32bit up to 30 Hz), 30 Vdc max input voltage
Analog Inputs	2 channels, range 0..20 mA, 0..30 V, 16 bit
Digital Outputs	2 relays output SPDT max 2 A 250 Vac
Ethernet Port	1 10/100 Mbps (RJ45)
Serial Ports	1 RS485 ModBUS Master, programmable baud rate, 1 RS485/RS232, programmable baud rate via terminals
USB Interface	MicroUSB
Supported Protocols	Ftp client, Smtp, http, ModBUS TCP, ModBUS RTU
Programming Software	SEAL 2.1 and later versions
Backup Battery	Yes (battery lasts about 60 minutes)
Commands and Voice Alarms	Yes
CPU	K64 120 MHz
RAM	256 kB
Flash (Program storage)	1 MB
Flash (Serial storage)	8 MB
Micro SD Slot	Push-pull slot. SD supported up to 32 GB
Data-logging	Measures, alarms, logging on MicroSD card or Flash memory
Additional Features	Mathematical functions, filters of ModBUS alarms, post/get http via modem and PPP
Standards	EN 301511, EN 301489-1/7, EN 60950

Resources

Operating Instructions

Brochures

NIPRESS DK-700

Z-UMTS R 7,820.00

Z-GPRS3

R 6,647.00

Power Supply	11..40 Vdc, 19..28 Vac
Power Consumption	2 W (standby), 6,5 W (max)
Isolation	1500 V ac
Ingress Protection	IP20
Operating Temperature	-10..+50°C
Dimensions	35x100x112 mm
Digital Inputs	4 channels PNP, NPN (counters @32bit up to 30 Hz), 30 Vdc max input voltage
Analog Inputs	2 channels, range 0..20 mA, 0..30 V, 16 bit
Digital Outputs	2 relays output SPDT max 2 A 250 Vac
Ethernet Port	1 10/100 Mbps (RJ45)
Serial Ports	1 RS485 ModBUS Master, programmable baud rate, 1 RS485/RS232, programmable baud rate via terminals
USB Interface	MicroUSB
Supported Protocols	Ftp client, Smtp, http, ModBUS TCP, ModBUS RTU
Programming Software	SEAL 2.1 and later versions
Backup Battery	Yes (battery lasts about 60 minutes)
Commands and Voice Alarms	Yes
CPU	K64 120 MHz
RAM	256 kB
Flash (Program storage)	1 MB
Flash (Serial storage)	8 MB
Micro SD Slot	Push-pull slot. SD supported up to 32 GB
Data-logging	Measures, alarms, logging on MicroSD card or Flash memory
Additional Features	Mathematical functions, filters of ModBUS alarms, post/get http via modem and PPP
Standards	EN 301511, EN 301489-1/7, EN 60950

Resources