| Weight | 0.2 g |
|---|---|
| Dimensions | 112 × 35 × 110 mm |
| Description |
24 CH digital input CANopen / ModBUS RTU |
| Protocols |
CANopen 401 v.2.01, RS485 two wires, ModBUS RTU slave protocol, 64 max nodes |
| Power Supply |
10..40 Vdc, 19..28 Vac |
| Max Power Consumption |
2.5W |
| Isolation |
1,5 kVac (3 way) |
| Response Time |
2.5ms |
| Polarity |
EN 61131-2 sink (npn) |
| Counters |
8 @ 32 bit (max 10 kHz) |
| Pulse Width |
Min 250 μs |
ZC-24DI
24 CH digital input CANopen / ModBUS RS485
ZC-24DI is used to interface N.24 digital signals (PUSH BUTTON, LIMIT SWITCH, REMOTE, CONTROL SWITCH, RELAIS etc.) with all of control systems which are able to communicate by the protocols CANopen or ModBUS RTU (protocol selectable through dip-switch). It disposes of 32 bit counters (N.8), maximum frequency input is 10 KHz. A 3-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas.
Additional information
Related products
ZC-24DO
24 CH digital output CANopen / ModBUS RS485
ZC-24DO is used to drive N.24 MOSFETS from all of the control systems which are able to communicate by the protocols CANopen or ModBUS RTU (protocol selectable through dip-switch). The digital output max load is 0,5 Awith ON/OFF delay of 1ms. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.
ZC-16DI-8DO
16 CH digital input - 8 CH digital output CANopen / ModBUS RS485
The ZC-16DI-8DO is an 16 CH input / 8 CH output mixed module. The inputs have 32-bit counters / 10 kHz max frequency, mosfet Outputs with shared negative pole. The communication protocols are CANopen or ModBUS RTU (protocol selectable through dip-switch). A 3-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas.